Grease - Suggestions needed

"HammerheadFistpunch" (hammerheadfistpunch) 09/07/2017 at 15:15 • Filed to: None

1

15

Looking for a high quality, sticky NGIL 2 lithium grease with LOTS of Moly for use in a slip joint. Im hoping that just by changing from O’reilly’s grease to something with higher moly and a little more stick that the vibes and shunt will go away. Any suggestions? needs to be in tubes for zerk injections.

benjrblant > HammerheadFistpunch 09/07/2017 at 15:20

1

No likey Valvoline Paladium? It’s 5% Molybdenum and is what I used when rebuilding the knuckles.

HammerheadFistpunch > benjrblant 09/07/2017 at 15:21

0

I’ve literally only ever use the cheap stuff, so I haven’t tried the valvoline. I will pick some up if its really 5%. Thats high.

benjrblant > HammerheadFistpunch 09/07/2017 at 15:23

0

I think I had to get it from Napa, somewhere around $5 a tube, don’t fully recall. It’s been a hot minute.

benjrblant > HammerheadFistpunch 09/07/2017 at 15:24

0

I bet you can find a Simpsons gif for every situation in life.

HammerheadFistpunch > benjrblant 09/07/2017 at 15:27

3

crowmolly > HammerheadFistpunch 09/07/2017 at 15:33

0

https://www.amazon.com/Synco-Chemical-Synthetic-Grease-400-gm/dp/B00GVKBQHY

I use this stuff for serviceable poly bushings. Works great.

Sweet Trav > HammerheadFistpunch 09/07/2017 at 15:37

0

I swear by super lube for all lubrication purposes.

http://www.super-lube.com/

Sweet Trav > crowmolly 09/07/2017 at 15:40

0

Super Lube is the shit. I put that shit on errythang.

HammerheadFistpunch > Sweet Trav 09/07/2017 at 15:44

0

I almost feel like I shouldn’t go to that site at work.

vicali > HammerheadFistpunch 09/07/2017 at 15:45

2

Hmm Zerk injections..

Sweet Trav > HammerheadFistpunch 09/07/2017 at 15:46

0

Nah. you’re safe unless ASTM and NLGI specs get you all hot and bothered.

HammerheadFistpunch > crowmolly 09/07/2017 at 15:47

0

Doesn’t seem to have moly, which Im looking for.

crowmolly > HammerheadFistpunch 09/07/2017 at 16:26

0

Ah, gotcha.

Well, for what it’s worth, Ford recommends PFTE grease on their slip yokes.

http://www.toyota-4runner.org/4th-gen-t4rs/93266-ford-fix-toyota-driveline-clunk.html

HammerheadFistpunch > crowmolly 09/07/2017 at 16:27

0

I think they use coated slip joints, mine are steel on steel.

Wacko > benjrblant 09/07/2017 at 16:42

0